Govee DMX Control: Patch Govee Lights Into Any DMX Console (No Soldering)

Yes — you can control Govee lights from real DMX software

If you've searched "Govee DMX control" or "control Govee with DMX," you've probably found the same dead ends: a GitHub script that only manages on/off and brightness, forum threads that end with "Govee isn't DMX controllable," and people literally soldering DMX decoders into their light strips.

DMX Smart Link takes a different approach: it patches your Govee lights into your lighting rig as real DMX fixtures. Your console or software sends Art-Net or sACN; DMX Smart Link translates it to your Govee lights over your local network — full color control, not just on/off.

How it works

• Input: Art-Net or sACN from any source — Lightkey, QLC+, MagicQ, ONYX, grandMA, xLights, or a hardware console.
• Output: your Govee lights (native LAN support), other smart lights via Homebridge, and wired DMX fixtures through a USB-DMX interface.
• Latency: control runs over your local network — no cloud round-trip, no unlocking your phone mid-show.

Why not the free DIY route?

We're honest about this: if you enjoy Linux config files, OLA triggers can switch Govee lights on and off. But RGB color over DMX is where the DIY projects stall, and most of the GitHub bridges (dmx-hue, Art-Net-for-LIFX) are no longer maintained. DMX Smart Link is a supported product from a veteran-owned company — when something breaks, a human answers.

Try it on the lights you already own

The 14-day free trial runs on Mac, Windows 11, Linux, or a Raspberry Pi 5 — no credit card required. If you want a plug-and-play appliance instead, the DMX Smart Link HUB is a pre-configured Pi that does the same job without a laptop on stage.

Start the free 14-day trial →